ماژول اثرانگشت Fp20
 
  • ماژول اثرانگشت Fp20

ماژول اثرانگشت Fp20

  • مدل کالا: ماژول اثرانگشت Fp20
  • موجودی: پیش سفارش
  • 140,000 تومان


این ماژول جدیدترین نسخه از ماژول های اثرانگشت سری SM20 و... است.
ماژول FP20 نسخه 2014 ماژول SM20 می باشد.

دانلود دیتاشیت

FP20 is a fingerprint and fingerprint processor combo chip design fingerprint identification module secondary development, with small size, low power consumption, simple interface, high reliability, small fingerprint template (496 bytes), large capacity fingerprint recognition (2000 Fingerprint response time of less than one second), etc., can be very easy to embed a user's system components to meet customer demand for fingerprint identification products.

The main functions include the following:
■        Send and receive commands via UART
■        Achieve the minimum storage conditions fingerprint data registration and comparison: 496 bytes fingerprint template
■        Optical reflection fingerprint sensor
■        1: N identification and 1:1 verification function
■        Compared with circulating collection function (Identify Free): Host HOST after sending the command module has been in fingerprint matching and comparing the results returned HOST
■        Fingerprint feature data read / write function
■        The security level can be properly adjusted
■        Fingerprint and extract eigenvalues upload, download fingerprint feature value and the current collection of fingerprint matching function
■        The baud rate can be set
■        You can set the device number
■        You can set a password to access the module (14 digit character password), so that the module is password protected mode, which greatly improves the security of communications.

 

Technical characteristics 
CPU: AS602 // 120MHz clock speed, 1M Bits Flash Memory, 128KB SRAM 
Fingerprint scanner : CMOS image sensors: GC0303, optical reflection principle 
Fingerprint enrollment capacity : 500 -5000 pieces scalable, standard configuration for 3000 
False Accept Rate (FAR) : <0.001% (Security Level Security Level 3) 
False Reject Rate (FRR) : <0.1% (Security Level Security Level 3) 
Than on the way : 1: N and 1:1 ratio for 
Fingerprint template size : 496 bytes Byte 
Security level settings : Level 1 to Level 5 can be set to the factory settings: Level 3 
Processing speed : Fingerprint feature extraction takes time <0.45 seconds // 1:. N ratio of the time (3000 at full registration) <1 2 seconds 
Communication Interface : UART, 3.3V-TTL level 
Serial communication parameters : No parity Parity = NONE, 1 stop bit Stop B it = 1 // No Flow Control Flow Control = NONE // Baud rate 9600,19200,38400,57600,115200 (bps) // Factory setting: 115200bps 
Operating Voltage : DC3.3V 
Current : Less than 100mA 
Work Environment : Working temperature: -10 ℃ - 60 ℃ // Relative Humidity: 20% - 80%

نوشتن نظر

توجه: HTML ترجمه نمی شود!
    بد           خوب